SP Tools

The #62020 fan clutch wrench two piece kit with rack and quick reference guide gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pumps. 

Two wrenches are needed to perform removal and replacement of the viscous fan clutch. One wrench to hold the water pump stationary (depending on the application a 99800A, 61600, 61500B, 10800 or 10900 ) and the other wrench a 95210 to remove and replace  

The #62050 fan clutch wrench five piece kit with rack and quick reference guide gives the professional technician the ability to service all fan clutches that have "bolt on" and "pressed on" pulleys on the water pump. Works with Chrysler, GM, Ford, Land 

This fan clutch wrench two piece kit gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pump. Works with Chrysler, GM, Ford, Land Rover and Mazda (Not including the 4.9 lit 

This three piece set gives the professional technician the ability to service all fan clutches that have bolted on water pump pulleys. 

“Taurus/Sable and Tempo/Topaz” This specialty wrench is used on 1986 and later sedans. 

“For Use On Most Mustangs, T-Birds, Cougars and Capris” This specialty socket has been designed to aid in the installation and removal of the front strut cartridge/insert used on all 1979 thru 1993 Ford Mustangs and 1979-1986 Mercury Capris. 

Part Number # 64250.On 2005 and later Ford Five Hundred, Ford Freestyle and Mercury Montego the brake caliper has a left handed thread. The counter clockwise threads in this tool enable pressing, correctly, the caliper piston until bottomed for brake pad 

This unique tool has been developed to aid in the removal and installation of front disc brake calipers found on most 1984 and later Ford 6000, 7000 & 8000 CF series trucks. 

This unique tool is designed to aid the technician in removal of the fan clutch. It’s pin design mates to the holes in the drive pulley of the fan clutch so that the technician can loosed the fan clutch nut. Holding this pulley correctly is required in  

With the advent of high pressure injection, the need to replace and correctly torque the injector lines has become more critical. This unique 17 mm 12 point flare nut socket and deep crows foot gives the technician the ability to remove various injector 

This unique wrench was developed to allow for quick and easy rear toe adjustments on Ford Taurus & Mercury Sable Station Wagons also Lincoln Continentals. The #90650 is held by a long 1/2 inch drive extension which enables the Technician, in most cases, t 

This unique wrench was developed to allow for quick and easy rear toe adjustments on Ford Taurus & Mercury Sable Station Wagons also Lincoln Continentals. 

This tool has been designed for easy brake shoe adjustment on most 1984 and later F-600 and larger Ford trucks and buses which come with a single rear axle equipped with Lucas­-Girling hydraulic brakes. 

These unique tools have been developed for use in disconnecting the fuel and air conditioning line couplers found on most late model automobiles. 

These unique tools have been developed for use in disconnecting the fuel and air conditioning line couplers found on most late model automobiles. 

These unique tools have been developed for use in disconnecting the fuel and air conditioning line couplers found on most late model automobiles. 

This unique tool, with it’s patent pending press and pull cup design allows the technician proper power steering pump seal removal on most G.M. power steering pumps 1975 to present. With this new design for removing seals, the conventional and the diffic 

This tool was designed to reach down through the engine compartment in areas that are not easily accessible with standard tools or “universal” belt tensioner tools. 

Accurately sets camber & toe adjustment utilizing a 12 point box end offset wrench was designed with a long reach arm to access adjustment points giving the technician easy adjustment to both camber and toe.